Sample LEED Checklist

LEED for New Construction v2.2 Registered Project Checklist
Yes	?	No
			Sustainable Sites				14 Points

Y			Prereq 1		Construction Activity Pollution Prevention		Required
			Credit 1		Site Selection		1
			Credit 2		Development Density & Community Connectivity		1
			Credit 3		Brownfield Redevelopment		1
			Credit 4.1		Alternative Transportation, Public Transportation Access		1
			Credit 4.2		Alternative Transportation, Bicycle Storage & Changing Rooms		1
			Credit 4.3		Alternative Transportation, Low-Emitting& Fuel-Efficient Vehicles		1
			Credit 4.4		Alternative Transportation, Parking Capacity		1
			Credit 5.1		Site Development, Protect or Restore Habitat		1
			Credit 5.2		Site Development, Maximize Open Space		1
			Credit 6.1		Stormwater Design, Quantity Control		1
			Credit 6.2		Stormwater Design, Quality Control		1
			Credit 7.1		Heat Island Effect, Non-Roof		1
			Credit 7.2		Heat Island Effect, Roof		1
			Credit 8		Light Pollution Reduction		1
Yes	?	No
			Water Efficiency				5 Points

			Credit 1.1		Water Efficient Landscaping, Reduce by 50%		1
			Credit 1.2		Water Efficient Landscaping, No Potable Use or No Irrigation		1
			Credit 2		Innovative Wastewater Technologies		1
			Credit 3.1		Water Use Reduction, 20% Reduction		1
			Credit 3.2		Water Use Reduction, 30% Reduction		1

			Energy & Atmosphere				17 Points

Y			Prereq 1		Fundamental Commissioning of the Building Energy Systems		Required
Y			Prereq 2		Minimum Energy Performance		Required
Y			Prereq 3		Fundamental Refrigerant Management		Required
			*Note for EAc1: All LEED for New Construction projects registered after June 26^th, 2007 are required to achieve at least two (2) points under EAc1.
			Credit 1		Optimize Energy Performance		1 to 10
						10.5% New Buildings or 3.5% Existing Building Renovations	1
						14% New Buildings or 7% Existing Building Renovations	2
						17.5% New Buildings or 10.5% Existing Building Renovations	3
						21% New Buildings or 14% Existing Building Renovations	4
						24.5% New Buildings or 17.5% Existing Building Renovations	5
						28% New Buildings or 21% Existing Building Renovations	6
						31.5% New Buildings or 24.5% Existing Building Renovations	7
						35% New Buildings or 28% Existing Building Renovations	8
						38.5% New Buildings or 31.5% Existing Building Renovations	9
						42% New Buildings or 35% Existing Building Renovations	10
			Credit 2		On-Site Renewable Energy		1 to 3
						2.5% Renewable Energy	1
						7.5% Renewable Energy	2
						12.5% Renewable Energy	3
			Credit 3		Enhanced Commissioning		1
			Credit 4		Enhanced Refrigerant Management		1
			Credit 5		Measurement & Verification		1
			Credit 6		Green Power		1

Yes	?	No
			Materials & Resources				13 Points

Y			Prereq 1		Storage & Collection of Recyclables		Required
			Credit 1.1		Building Reuse, Maintain 75% of Existing Walls, Floors & Roof		1
			Credit 1.2		Building Reuse, Maintain 100% of Existing Walls, Floors & Roof		1
			Credit 1.3		Building Reuse, Maintain 50% of Interior Non-Structural Elements		1
			Credit 2.1		Construction Waste Management, Divert 50% from Disposal		1
			Credit 2.2		Construction Waste Management, Divert 75% from Disposal		1
			Credit 3.1		Materials Reuse, 5%		1
			Credit 3.2		Materials Reuse,10%		1
			Credit 4.1		Recycled Content, 10% (post-consumer + ½ pre-consumer)		1
			Credit 4.2		Recycled Content, 20% (post-consumer + ½ pre-consumer)		1
			Credit 5.1		Regional Materials, 10% Extracted, Processed & Manufactured Regionally		1
			Credit 5.2		Regional Materials, 20% Extracted, Processed & Manufactured Regionally		1
			Credit 6		Rapidly Renewable Materials		1
			Credit 7		Certified Wood		1
Yes	?	No
			Indoor Environmental Quality				15 Points

Y			Prereq 1		Minimum IAQ Performance		Required
Y			Prereq 2		Environmental Tobacco Smoke (ETS) Control		Required
			Credit 1		Outdoor Air Delivery Monitoring		1
			Credit 2		Increased Ventilation		1
			Credit 3.1		Construction IAQ Management Plan, During Construction		1
			Credit 3.2		Construction IAQ Management Plan, Before Occupancy		1
			Credit 4.1		Low-Emitting Materials, Adhesives & Sealants		1
			Credit 4.2		Low-Emitting Materials, Paints & Coatings		1
			Credit 4.3		Low-Emitting Materials, Carpet Systems		1
			Credit 4.4		Low-Emitting Materials, Composite Wood & Agrifiber Products		1
			Credit 5		Indoor Chemical & Pollutant Source Control		1
			Credit 6.1		Controllability of Systems, Lighting		1
			Credit 6.2		Controllability of Systems, Thermal Comfort		1
			Credit 7.1		Thermal Comfort, Design		1
			Credit 7.2		Thermal Comfort, Verification		1
			Credit 8.1		Daylight & Views, Daylight 75% of Spaces		1
			Credit 8.2		Daylight & Views, Views for 90% of Spaces		1
Yes	?	No
			Innovation & Design Process				5 Points

			Credit 1.1		Innovation in Design: Provide Specific Title		1
			Credit 1.2		Innovation in Design: Provide Specific Title		1
			Credit 1.3		Innovation in Design: Provide Specific Title		1
			Credit 1.4		Innovation in Design: Provide Specific Title		1
			Credit 2		LEED^®Accredited Professional		1
Yes	?	No
			Project Totals (pre-certification estimates)				69 Points
				Certified: 26-32 points, Silver: 33-38 points, Gold: 39-51 points, Platinum: 52-69 points

Sample LEED Checklist

<< back to "About LEED"